IH8MUD Forums - View Single Post

Go4aRyd · 08-23-06, 05:57 PM

For the door, I took out the Driver's side button (its on the inside of the suicide door), disconnected, then carefully pulled apart the switch assembly so I could get to the metal mounting plate. I then used some mastic paper to insulate the button from the bracket - put it all back together and re-installed. Then the old "back it out 1/2 turn" trick worked just fine after tightening it back on in place. I didn't want to lose the electrical inside the door in case I needed it back on someday.

08-23-06, 05:57 PM	#11
Go4aRyd IH8MUD Rookie Join Date: Apr 2006 Location: Boise, Idaho Posts: 65	For the door, I took out the Driver's side button (its on the inside of the suicide door), disconnected, then carefully pulled apart the switch assembly so I could get to the metal mounting plate. I then used some mastic paper to insulate the button from the bracket - put it all back together and re-installed. Then the old "back it out 1/2 turn" trick worked just fine after tightening it back on in place. I didn't want to lose the electrical inside the door in case I needed it back on someday. __________________ Go4aRyd - '07 FJ Cruiser, Voodoo Blue, AT, TRD wheels, BFG A/T KO. white bezel, Demello sliders, Gobi Stealth