|
I've never seen a 2F that will show oil flow at the rockers on initial start up within 15 seconds. But 5 minutes is longer by far than it should take.
Popping the distributor out and spinning the oil pump with a drill is easy. But it's a crap shoot as to whether that will oil the rockers anyway (the camshaft needs to be spinning for thre oil to pass through it.
I'l dump some oil over the rocker assembly to keep from damaging anything, and run it for a while.... Assuming that:
You made sure that the headgasket got installed correctly. If it's put in backward/upside down the oiling passage is blocked.
You're sure that the distributir is seated in the pump and that you have oil pressure.
Mark...
|