|
Just a lift
I would first like to add that this will be a progressive write-up as the lift was just installed a week ago.
1. What lift Kit / components did you use? Include Spacers, if any.
2 x OME 850J Front Coil Springs
2 x OME 863J Rear Coil Springs
2 x N73L Nitrocharger Shocks
2 x N74L Nitrocharger Shocks
1 x SD24 Steering Damper
1 x CA77B Caster Kit
2 x Slee Stainless Brake Lines
2 x Slee Front Bump stops
2. Why did you select that particular lift?
After reading through quite a few posts I found this was what I was looking for.
3. What tire size are you running?
315/75/16 Terra Grapplers
4. Rim specs - 16x8 w/ "x" backspacing
Factory FJ80 wheels (16 x 8)
5. What caster correction, if any have you used?
Old Man Emu CA77B Caster Kit
6. Have you had any rubbing issues?
Will follow up on this as lift was just installed
7. Did you have any Driveline issues? What was the cause and how did you fix it?
Notice a slight vibration on accelaration, haven't gotten a thorough diagnosis yet
8. What is your main on and off-road uses of vehicle?
Currently daily driver/weekend wheeler
9. Are you happy with the performance on and off-road your for your use.
Thus far, I could not say a bad thing about it, I have noticed a slight sacrifice in braking with the 315's but nothing drastic
10. What would you do if you were going to do it differently?
Nothing, currently no complaints
11. Any plans on modifying the lift or other related components (Tire size)?
I would like to add spacers to the front once I get the ARB back on
Sitting level after a thorough bath. Action picks coming soon
__________________
Greg
Olde North State Cruisers
95 FZJ80, "D" light works...oh and a few other things
92 P/U, 1KZ-TE/R151F 5 Speed M/T Diesel, 2" OME, 255/85/16, DD. July ROTM
79 FJ55, 2F w/1.5F Head and 3FE manifolds, H55F/Split Case, Factory PS, Rusty but I'm working on it...
Last edited by southerncruiser62; 11-01-06 at 06:40 PM.
|