Exhaust Manifold Crack

Crain · 04-14-08, 02:53 PM

Hello all,

I have a 99 100 with 26,000 miles and counting (yes 26k). At any rate, I was told this weekend that the right exhaust manifold had a small fracture in it. This causes an exhaust noise (very slight) when I floor it.

I have found allot of info on the forum, but still have questions.

My questions are as follows:

Do I need to replace this right away (if so, both sides or just the cracked one)?
Is there an aftermarket alternative?

I called Toyota and they want $1,300 per side, ouch! Additionally they said it would not be covered by any emission warranty.

Please assist.

pint · 04-14-08, 03:07 PM

Oh yes, the dreaded exhaust manifold crack. It is common and can be costly. No easy fix that I am aware of other than replacing. I looked and looked, but ended up having Lexusben replace mine. He did a great job and at a fair price. PM me if interested and i can hook you up. No rush to fix as I drove mine for nearly 50K without a problem. Just get used to the annoying tick, tick, tick! It will get worse as the crack opens, but won't cause any problems I'm aware of. I could go on for hours...We need to hook up for a beer anyway...all the south Denver 100's, you, me, BMWSTOY, etc!

1loudLX · 04-14-08, 04:17 PM

ya i think mine are starting to "go" again. Can we please get someone in CA todrop their truck off to get one of those performance companies to R&D some quality headers?

e9999 · 04-14-08, 08:34 PM

Darn, I don't remember if we ever finished the discussion on whether one can check visually for the cracks with everything assembled, or not...

I'm still hoping that we would also get some detailed pics of the thing...

Yotato · 04-14-08, 08:37 PM

Quote:

Originally Posted by 1loudLX

ya i think mine are starting to "go" again. Can we please get someone in CA todrop their truck off to get one of those performance companies to R&D some quality headers?

I'm in the Sacramento, CA area. Give me details and I may consider mine for fitment.

pint · 04-14-08, 08:57 PM

Quote:

Originally Posted by e9999

Darn, I don't remember if we ever finished the discussion on whether one can check visually for the cracks with everything assembled, or not...

I'm still hoping that we would also get some detailed pics of the thing...

The cracks on mine were on the inside bend near the engine under the flange that screws into the block. I've heard this is where they usually are. No way to possibly see or feel with the manifolds on the vehicle. Sorry no pics.

agomez · 04-15-08, 07:33 AM

I did a write up on the manifold replacement about a month ago let me know if you need any help...it was pretty easy on the passengerside...

Crain · 04-15-08, 09:21 AM

Hello all,

Pint, I know the second I write this it I will start hearing the ticking noise you speak of, but at this point there is no such noise. Mine sounds more like extra air escaping form the tail pipe upon hard acceleration.

On a lighter note I passed a Jeep Grand Cherokee with a Toyota Recovery Unit sticker plastered on the tail gate. It was broken down on the side of the Highway.

1loudLX · 04-15-08, 05:43 PM

Quote:

Originally Posted by Yotato

I'm in the Sacramento, CA area. Give me details and I may consider mine for fitment.

http://forum.ih8mud.com/100-series-c...corona-ca.html

calamaridog · 04-16-08, 10:59 AM

I just emailed Gibson to see if they are still interested in making headers.

1loudLX · 04-16-08, 09:06 PM

did you mention the original offer to them?

calamaridog · 04-17-08, 08:16 AM

Quote:

Originally Posted by 1loudLX

did you mention the original offer to them?

The "original offer" that was never confirmed or posted on their website over 2 years ago

ShottsUZJ100 · 04-17-08, 01:10 PM

Quote:

Originally Posted by Crain

On a lighter note I passed a Jeep Grand Cherokee with a Toyota Recovery Unit sticker plastered on the tail gate. It was broken down on the side of the Highway.

I would have went back in my 100, pulled over to help and offered a strap!

1loudLX · 04-17-08, 01:22 PM

Quote:

Originally Posted by Crain

On a lighter note I passed a Jeep Grand Cherokee with a Toyota Recovery Unit sticker plastered on the tail gate. It was broken down on the side of the Highway.

wow i totally missed that........thats funny stuff right there!

Crain · 04-18-08, 10:50 AM

No one was there to offer a strap too. If I only had a sticker that said "JEEP it's what's for dinner", I would have pulled over and placed it on his bumper.

1loudLX · 04-18-08, 05:37 PM

Quote:

Originally Posted by Crain

No one was there to offer a strap too. If I only had a sticker that said "JEEP it's what's for dinner", I would have pulled over and placed it on his bumper.

you just gave me ideas...

MARCVS · 04-20-08, 12:11 AM

Mine has been ticking for years. When I had the money to fix it, I didn't care. Now that I don't really have the money to fix it, I don't care....I've become "enlightened"....so that my wallet won't be.

LinksLC · 06-09-08, 10:15 AM

Have the same "ticking" noise under acceleration! Either a crack or warped, been like that for about 15k. If Gibson decides on engineering an aftermarket header, I'd buy a set. Keep me posted.

blossett · 06-09-08, 12:47 PM

I have the same ticking sound. Hoping it was exhaust system leak and not a manifold. Does any one offer headers currently?

Crain · 06-10-08, 08:57 AM

Not at this time

SWUtah · 06-10-08, 09:19 AM

I have the exhaust system tick (expanding and contracting stainless steel exhaust system), not the exhaust maniflold tick.

04-14-08, 02:53 PM	#1
Crain IH8MUD Rookie Join Date: Nov 2007 Location: Parker, CO Posts: 48	Exhaust Manifold Crack Hello all, I have a 99 100 with 26,000 miles and counting (yes 26k). At any rate, I was told this weekend that the right exhaust manifold had a small fracture in it. This causes an exhaust noise (very slight) when I floor it. I have found allot of info on the forum, but still have questions. My questions are as follows: Do I need to replace this right away (if so, both sides or just the cracked one)? Is there an aftermarket alternative? I called Toyota and they want $1,300 per side, ouch! Additionally they said it would not be covered by any emission warranty. Please assist. __________________ Crain 1999 Land Cruiser 29k on the clock Last edited by Crain; 04-14-08 at 03:09 PM.

04-14-08, 03:07 PM	#2
pint IH8MUD Lifer Join Date: Jul 2005 Location: Parker, CO TLCA# 17493 Posts: 1,091	Oh yes, the dreaded exhaust manifold crack. It is common and can be costly. No easy fix that I am aware of other than replacing. I looked and looked, but ended up having Lexusben replace mine. He did a great job and at a fair price. PM me if interested and i can hook you up. No rush to fix as I drove mine for nearly 50K without a problem. Just get used to the annoying tick, tick, tick! It will get worse as the crack opens, but won't cause any problems I'm aware of. I could go on for hours...We need to hook up for a beer anyway...all the south Denver 100's, you, me, BMWSTOY, etc! __________________ 2000 UZJ100, OME 865, OME T-bars, Slee Diff Drop, Slee SliderSteps, TJM T3, PowerStop Cross Drilled & Slotted Rotors, 295 Terra Grapplers M101 Trailer - Sold 1993 Bontrager Race Lite MTB

04-14-08, 04:17 PM	#3
1loudLX Mall-Cruiser Join Date: Jan 2006 Location: New York TLCA# I NO HAZ K? Posts: 2,987	ya i think mine are starting to "go" again. Can we please get someone in CA todrop their truck off to get one of those performance companies to R&D some quality headers? __________________ 2000 Lexus LX470 - K&N/SLP/HIDs/Clear Corners/LEDs/Nav/Sirius/Black LC 16"s/BFG AT 285s/Unity Spotlight/Black'd Trim 2005 Specialized FSR XC - CF HBar/XC Stem/Alias 143 Seat/Sidewinder Grips Oo==L==oO Need OEM Lexus LX470 Foglights? http://forum.ih8mud.com/sale-parts/2...s-98-02-a.html Need some Michelin LTX M/S 275/70/16's? http://forum.ih8mud.com/sale-tires-w...-shipping.html

04-14-08, 08:34 PM	#4
e9999 You want to do what...? Join Date: Sep 2003 Location: PRK Posts: 10,202	Darn, I don't remember if we ever finished the discussion on whether one can check visually for the cracks with everything assembled, or not... I'm still hoping that we would also get some detailed pics of the thing... __________________ '97: 88K, 3xlock, Custom HD roo bar for sale, 285 MT/Rs on steelies, Hanna sliders, 851+1.5"/863/N73/N74E/SD24, ARB bull with M12, Kaymar with duals, Kaymar rack, Slee TC skid, 2m/440, more stuff, loose nut behind the wheel!) '03: 99K, the better half's... DD souped up DR650

04-15-08, 07:33 AM	#7
agomez IH8MUD Regular Join Date: Apr 2005 Location: San Antonio, Texas Posts: 283	I did a write up on the manifold replacement about a month ago let me know if you need any help...it was pretty easy on the passengerside... __________________ 2000 uzj100 1995 Fzj80 Pearl Gray mallcruiser with damage multipliers front and back tacos al cabron

04-15-08, 09:21 AM	#8
Crain IH8MUD Rookie Join Date: Nov 2007 Location: Parker, CO Posts: 48	Hello all, Pint, I know the second I write this it I will start hearing the ticking noise you speak of, but at this point there is no such noise. Mine sounds more like extra air escaping form the tail pipe upon hard acceleration. On a lighter note I passed a Jeep Grand Cherokee with a Toyota Recovery Unit sticker plastered on the tail gate. It was broken down on the side of the Highway. __________________ Crain 1999 Land Cruiser 29k on the clock

04-16-08, 10:59 AM	#10
calamaridog IH8MUD Lifer Join Date: Jun 2003 Location: Cuyamaca, CA and Las Vegas, NV Posts: 2,572	I just emailed Gibson to see if they are still interested in making headers. __________________ 2000 UZJ100 - OME - sold Currently looking for the right FJ60 TLCA #14734 Calamaridog

04-16-08, 09:06 PM	#11
1loudLX Mall-Cruiser Join Date: Jan 2006 Location: New York TLCA# I NO HAZ K? Posts: 2,987	did you mention the original offer to them? __________________ 2000 Lexus LX470 - K&N/SLP/HIDs/Clear Corners/LEDs/Nav/Sirius/Black LC 16"s/BFG AT 285s/Unity Spotlight/Black'd Trim 2005 Specialized FSR XC - CF HBar/XC Stem/Alias 143 Seat/Sidewinder Grips Oo==L==oO Need OEM Lexus LX470 Foglights? http://forum.ih8mud.com/sale-parts/2...s-98-02-a.html Need some Michelin LTX M/S 275/70/16's? http://forum.ih8mud.com/sale-tires-w...-shipping.html

04-18-08, 10:50 AM	#15
Crain IH8MUD Rookie Join Date: Nov 2007 Location: Parker, CO Posts: 48	No one was there to offer a strap too. If I only had a sticker that said "JEEP it's what's for dinner", I would have pulled over and placed it on his bumper. __________________ Crain 1999 Land Cruiser 29k on the clock

04-20-08, 12:11 AM	#17
MARCVS IH8MUD Rookie Join Date: Dec 2007 Posts: 23	Mine has been ticking for years. When I had the money to fix it, I didn't care. Now that I don't really have the money to fix it, I don't care....I've become "enlightened"....so that my wallet won't be. __________________ 2000 LX470 : Current Mods - CUSTOM EXHAUST MANIFOLD CRACK WITH UNIQUE TICKING SOUND. Future Plans Include: Car wash (completed), maybe a vacuuming (not yet), possibly rolling down the windows. Last edited by MARCVS; 04-20-08 at 12:30 AM.

06-09-08, 10:15 AM	#18
LinksLC IH8MUD Rookie Join Date: Jan 2007 Location: Connecticut Posts: 4	Have the same "ticking" noise under acceleration! Either a crack or warped, been like that for about 15k. If Gibson decides on engineering an aftermarket header, I'd buy a set. Keep me posted.

06-09-08, 12:47 PM	#19
blossett IH8MUD Rookie Join Date: May 2008 Location: Louisiana Posts: 6	headers I have the same ticking sound. Hoping it was exhaust system leak and not a manifold. Does any one offer headers currently?

06-10-08, 08:57 AM	#20
Crain IH8MUD Rookie Join Date: Nov 2007 Location: Parker, CO Posts: 48	Not at this time __________________ Crain 1999 Land Cruiser 29k on the clock

06-10-08, 09:19 AM	#21
SWUtah IH8MUD Lifer Join Date: Sep 2005 Location: Some where other then Utah Posts: 1,255	I have the exhaust system tick (expanding and contracting stainless steel exhaust system), not the exhaust maniflold tick. __________________ Mercedes SL550 LX470

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://forum.ih8mud.com/100-series-cruisers/216231-exhaust-manifold-crack.html
Posted By	For	Type	Date
Exhaust Manifold Crack - IH8MUD.com Forum	This thread	Refback	04-17-08 05:48 PM